Mega 200VWR Guide d'installation télécharger pdf (Page 140)

Mega 200VWR Router

Chapter 4: Configuration

140

Edit One-to-One NAT (Network Address Translation)

One-to-One NAT maps a specific private/local (LAN) IP address to a particular global/public (WAN) IP

address.

If you have multiple public/WAN IP addresses provided by your ISP, you are will be able to use the

One-to-One NAT function to utilize these IP addresses.

NAT Type: Select the desired NAT type. By default, the One-to-One NAT function is disabled.

Global IP Address:

~ Subnet: The subnet of the public/WAN IP addresses given by your ISP. If your ISP has

provided this information, you may insert it here. Otherwise, use the IP Range method to define

your addresses.

~ IP Range: The IP address range of your public/WAN IP addresses. For example, IP:

192.168.1.1, end IP: 192.168.1.10

Select the Apply button to apply your changes.

Click on

to create a new One-to-One NAT rule:

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 169 170

Pas de commentaire

Mega 200VWR Guide d'installation Page 140